High Defination Lead Edge Flexo Printer Slotter Machine
machine is composed of paper feeding, printing, die cutting, stacking,
etc. It can complete the printing and die cutting of three-layer and
five-layer corrugated cardboard at one time.
1. Wall panel thickness 50mm, material is HT250, process: medium
frequency tempering internal stress, increase wall panel density,
hardness, strength, toughness, and conductivity, artificial aging
treatment, large processing center pair processing, high strength, High
precision, never deformed.
2. The transmission system adopts large helical angle helical gear
transmission, which has low noise, enhances the strength of the gear,
and improves the transmission stability of the gear. All transmission
gears are made of 40CrMnTi high-quality alloy steel, which is quenched
and tempered by high-frequency quenching, super hard processing and fine
grinding. It has high strength and durability. The whole machine adopts
closed spray lubrication and oil balance device to ensure the gears are
highly lubricated forever.
3. The bearing adopts international imported high quality brand-name
bearings. One by one inspection, qualified to enter the warehouse.
4. Each unit is electrically connected and equipped with an alarm bell.
When the clutch is engaged, the bell is continuously alerted to ensure
the safety of the operator. The units can collide with each other during
the wrong operation.
5. Each unit has an automatic zero return system, and a small amount of
cardboard can be sent to the correct size to reduce the waste of
6. The whole machine is beautiful in appearance and soft in color. The
modular design allows you to increase or decrease each unit arbitrarily.
7. The motor uses a variable frequency speed control motor. The
electrical appliances adopt Schneider and Chint brand-name products.
8. Pneumatic components: The cylinder adopts Zhejiang “Sanzheng”
brand-name cylinder, the solenoid valve adopts Guangzhou “Yadeke”
brand-name products, and the diaphragm pump adopts Zhejiang “Desheng”
brand-name products. The rubber roller adopts the high-quality rubber
roller produced by Baoding Jinghui Rubber Roller Manufacturing Co., Ltd.
9. The ceramic anilox roller adopts high-quality ceramic anilox roller produced by Jiangsu Haili Company.
whole process of vacuum adsorption transmission, using 5.5KW
high-efficiency energy-saving frequency conversion motor, all ceramic
adsorption paper feed wheel, the paper feeding is accurate and smooth. 0
pressure does not hurt the cardboard.
Servo die cutting is equipped with German Rexroth servo motor and independent servo die cutting.
The ink transmission system is designed to be reformed. It adopts
imported motor with cross link shaft and gear transmission to reduce
noise, enhance the tightness of the transmission, improve the running
speed and stability of the machine, and improve the printing precision
and overprint precision.
The machine is evenly inked, the ink volume is controllable, the ink is
prevented from overflowing, and the exterior of the ink path is clean
and hygienic; and the ink-deficient alarm device is provided to prevent
damage to the rubber roller due to lack of ink, and the waste product
productivity can be effectively reduced.
Each unit is equipped with a contact flow type oil level balancing
device to prevent the lack or overflow of oil in individual units.
1, machine clutch
1) The electric control machine is equipped with an alarm bell, and the
bell is continuously ringed during the journey to ensure the safety of
2) The drive shaft is equipped with a friction clutch to avoid malfunction and damage the machine.
3), pneumatic interlocking device.
4) The main motor starts to protect the device. After the units are
closed, each group is pneumatically locked and equipped with a total
locking cylinder, which can make the units and the bottom rail lock
together. When the cylinder is not locked, the main motor cannot start
running; when the main motor is running, the locking cylinder cannot be
1), matching leading edge paper feeding system, high-precision paper
feeding, intelligent and controllable paper feeding time. It can
transport hard cattle cardboard and three, five and seven layers.
3), vacuum adsorption paper feeding, to overcome the difference in the
degree of bending of the cardboard, to ensure smooth paper feeding.
4), the side baffle electric adjustment, the front baffle gap manual
synchronous adjustment, the rear baffle position electric adjustment.
5), separate sheet feeding device (you can choose continuous or separate sheet feeding).
6), the planned production quantity can be set. When the plan is
completed, the system automatically instructs to stop feeding and send a
warning signal. The paper feeding unit is equipped with a PLC color
touch screen, which displays the phase setting of the printing and die
cutting section, and can set and display the production quantity to the
3. Vacuum cleaner
1), equipped with high-quality brush, and equipped with a vacuum device,
can remove impurities on the printing surface of the board to improve
4. Transfer paper feeding system:
Passing paper feeding adopts high-efficiency energy-saving frequency
conversion motor, vacuum adsorption, all-ceramic adsorption paper
feeding wheel, and the paper feeding is smooth and fast.
5, automatic zero device
1) The paper feeding unit, printing unit and die cutting unit are electrically reset to zero.
2), the general carton uses the automatic zeroing device, the test can
be adjusted to the correct position with less sheets, reducing the waste
1, printing roller
1) Printing roller ¢ 405.6 (including diameter ¢ 410)
2) Seamless steel pipe material, surface grinding, hard chrome plating.
3) Balance correction and smooth operation.
4) Ratchet fixed coil plate shaft, full-hanging grooved hanging plate.
It is equipped with a hanging correction function, which saves the
hanging time and improves work efficiency.
5) When loading and unloading plates, the electric control of the foot switch is reversed.
6) Phase adjustment: The printing roller is equipped with automatic zero
return device, and adopts PLC multi-function touch screen control,
touch screen man-machine interface, click to enter the plate roller
phase adjustment interface; with automatic zero return, automatic plate
and preset print position, etc. Features.
7) The axial adjustment is electric adjustment, and the adjustable distance is 10mm each.
2, embossing roller
1) High-quality seamless steel pipe, which is made by deep hole boring and boring.
2) The outer diameter of the stamping stick is ¢154mm.
3) High frequency hot loading, double disc welding.
3) Balance correction, remove the centrifugal force and run smoothly.
4) The embossing roller gap dial shows electric adjustment, the
adjustment range is 1-11mm, and it is connected by the cross slider.
When adjusting, the transmission gear will always ensure the correct
position to engage.
3. The ceramic anilox roller adopts Jiangsu Haili Company to produce
high-quality ceramic anilox roller, and the cable can be selected from
1) The outer diameter of the net stick is ¢212mm.
2) The dots are consistent and the ink is evenly distributed.
3) The anilox roller gap dial shows electric adjustment, the adjustment
range is 1-8mm, and the cross slider is used for connection. When
adjusting, the transmission gear will always ensure the correct position
to engage. (The cross slider is a bearing type cross slider)
4) Pneumatic lifting net roller prevents the ink from drying out when
the printing plate is repeatedly inked and the machine is stopped for a
5) This machine adopts the domestic famous brand Guangdong Keruo stable scraper system.
4, the ink chamber
1) It is made by Guangzhou Kerou Machinery Equipment Co., Ltd.
2) Innovative chamber fluid dynamics and ink seal design, good ink transfer effect, and more ink saving.
3) Air pressure or cylinder adjustment lock, scraper wear automatically
compensates, so that the anilox roller and the squeegee fit better to
obtain the best squeegee effect.
4) All-round installation design can replace any old-fashioned rubber roller or single scraper system.
5, ink system
1) Ink is applied by pneumatic two-way diaphragm pump, the ink supply is stable, and the operation and maintenance are simple.
2) Ink cup to prevent ink splashing and venting,
3) Stainless steel ink fountain, automatic cycle cleaning and automatic inking.
4) The equipment is equipped with an ink-deficient alarm system, which
has high and low liquid level detection. If the ink quantity is
insufficient, the alarm bell will be automatically sounded, and the ink
quantity will be fully suspended.
Die Cutter Unit
1. Pressure roller
1) The shaft diameter is 85mm, seamless steel pipe, after two grinding
processes, the surface is plated with hard chrome and the movement is
2) The pressure dial wheel dial shows electric adjustment. The
adjustment range is 1-10mm. It is connected by the cross slider. When
adjusting, the transmission gear will always ensure the correct
2, pad roller
1) Rubber pad roller Φ434.2 unknown mm (excluding superior rubber pad)
2) Alloy structure seamless steel pipe processing and grinding, hard chrome plating.
3) Youli rubber pad thickness 8mm. (outer diameter 450mm) width 250mm, under normal circumstances, 6 million times.